Skip to content
Application Fluid (makes vinyl installations faster and easier)
- Free US Shipping
- Free 90-Day Return Policy
Application Fluid for Vinyl Wraps Decals Stickers 4oz Sprayer
Vinyl Application Solution
Application Fluid shocked installers by allowing them more control over their applications than ever before. Now what took hours could be accomplished in minutes. Using Application fluid can often allow a large graphic to be installed with one person where two people were required to perform the same installation dry. It also cleans the substrate without leaving residues ensuring a contaminant-free installation. It then helps to “float” the vinyl film until it is properly positioned. Application Fluid’s best feature is that it effectively breaks the surface tension of the adhesive on the film allowing it to flow and bond to the substrate more effectively than even a dry application. It is now possible to achieve a full bond in as little as ninety seconds. Your customers and your reputation will benefit from higher-quality applications. Your bottom line will benefit from faster applications and fewer failures as well.
Detailed Use Instructions
STEP 1. Clean surface thoroughly with Application Fluid and a kitchen paper towel. Do Not Use Other Cleaners Or Solvents.
STEP 2. Spray the surface again with Application Fluid, peel the backing off the decal, and place on the wet surface.
STEP 3. Position decal. Use a squeegee to remove fluid, using a good deal of pressure and working from the center out to the edges in all directions.
STEP 4. Wait 2-3 minutes. Saturate paper cover tape, if any, with Application Fluid, then remove the paper tape. Wipe the surface with a paper towel.
Here are some examples of car models that fit within each size category:
1. Hatchback or Small Car:
• Toyota Yaris, Volkswagen Golf R, Chevrolet Bolt, Hyundai Accent, etc.
2. Sedan or Coupe:
• Sedan: Honda Civic, Toyota Camry, Nissan Altima, etc.
• Coupe: Ford Mustang, Chevrolet Camaro, Audi A5, Dodge Challenger, etc.
3. Convertible, Roadster or Sport Car:
• Convertible: Mazda MX-5 Miata, BMW Z4, Mercedes-Benz C-Class Cabriolet, etc.
• Roadster: Porsche Boxster, Audi TT Roadster, BMW M2 Competition, etc.
• Sport Car: Chevrolet Corvette, Nissan GT-R, Porsche 911, etc.
4. SUV or CUV:
• SUV: all Jeep models, Toyota RAV4, Honda CR-V, Ford Explorer, etc.
• CUV: Mazda CX-5, Subaru Forester, Hyundai Kona, etc.
5. Pick-up Truck:
Toyota Tacoma, Ford Ranger, Chevrolet Colorado, Ford F-150, Chevrolet Silverado 1500, RAM 1500, etc.
If you would like to print your own photo for the hood wrap, please visit:
For custom wraps for both sides of the car, please visit:
https://favorgraphics.com/products/custom-both-sides-car-wrap
or
Full Wrap (including vinyl wraps for the hood, both sides of the car, the back, and the roof):
https://favorgraphics.com/products/custom-full-wrap-for-cars
Alternatively, you can reach out to us at info@favorgraphics.com
Our Vinyl is a premium gloss opaque vinyl designed for use in fleet marking and vehicle wrap as well as corporate identity applications. It provides superior conformability to irregular surfaces such as compound curves and corrugations Easy Apply™ and Easy Apply™ RS features offer the benefits of reduced wrinkling and air entrapment inherent in the application of decals. The RS feature also provides repositionability and slideability for exact positioning.
Laminating film:
Our laminating film is a premium quality, ultra thin, ultracomformable vinyl film designed for use as a protective overlaminate film for solvent, UV, latex, and screen print inks. It offers an exceptional value for applications requiring a variety of finishes, providing excellent conformability, abrasion resistance, and durability. The gloss film now features a synthetic liner that creates a super smooth high gloss finish which provides an overall paint like finish of printed graphics.
Specifications:
Vinyl Film: 50 micron high gloss white vinyl.
Adhesive: Grey permanent acrylic with Easy Apply RS™ and long term removability.
Removability: Up to 5 years.
Backing: Two side PE coated StaFlat™ paper, 145g/m2.
Outdoor life**: Up to 10 years unprinted.
Application surface: Flat, simple curves, rivets and compound curves & corrugations.
Laminating film: 1.3 mil (32 microns) high gloss film.
Adhesive: Permanent Acrylic (clear).
Liner: 2 mil Transparent Synthetic.
Durability: Up to 4 years.
Application Surfaces: Flat, Flat with Rivets, Corrugations, Complex Curves (vehicle wraps).
Shipping: After you place an order, you will receive an email confirming your order.
Items are printed and made-to-order. Your items will ship within 2-5 business days.
Items are shipped from our warehouse in Wisconsin and usually take 3-7 business days to reach customers anywhere in the world. Once your order is shipped, you'll receive a tracking number.
Return: Not satisfied with the design? We will refund your purchase upon returning the artwork. No questions asked!With our money-back guarantee, reach out to us within 90 days of receiving your artwork (as indicated by the tracking number) and we’ll be happy to refund your purchase to the original credit card used with the order.*
*Please note that shipping charges should be covered by the customer.
To return your item:
1. Email us to info@favorgraphics.com
2. You will be assisted as soon as we are notified and your return label will be sent via email.